
The Short Answer
A complete community water well in rural India — drilled to safe aquifer depth, fitted with an India Mark II hand pump, mounted on a concrete platform, and dedicated with an engraved plaque — costs approximately $1,950 through SevaChild. It serves 150–500 villagers for 20+ years, which works out to roughly $4 to $13 per person for two decades of clean drinking water.
Full Cost Breakdown — $1,950
Every component that goes into a finished, dedicated community water well in rural India.
| Component | What it covers | Cost (USD) |
|---|---|---|
| Borewell drilling (200–350 ft) | Deep enough to reach a safe aquifer below contaminated surface layers. | $1,100 – $1,300 |
| India Mark II hand pump | Cast-iron pump built to a government standard so parts are locally replaceable. | $200 – $250 |
| Concrete platform & drainage | Raised apron and channel keep the pump area clean and sanitary. | $200 – $300 |
| Engraved donor plaque | Personalized dedication mounted at the well site. | $80 – $120 |
| Site survey, transport, labor | Hydrogeological survey, rig transport, and skilled installation crew. | $150 – $200 |
| Project management & reporting | US oversight, photos, and a full donor report at completion. | Included |
| Total per complete well | One finished, dedicated well serving an entire village. | $1,950 |
Why Water Well Costs Vary by Region
If you've researched water charities, you've probably seen well costs anywhere from $300 to $15,000. The range is real — and it comes down to four things: geology (how hard the ground is and how deep the water table sits), logistics (how far equipment and crews have to travel), scope (a hand-dug family well vs. a full community borewell), and what's included (drilling only vs. platform, plaque, training, and reporting).
| Region | Typical cost | Why |
|---|---|---|
| Rural India (hand-pump borewell) | $1,500 – $3,000 | Softer geology, established supply chains, India Mark II standardization. |
| Sub-Saharan Africa | $5,000 – $15,000 | Harder rock, deeper drilling, remote logistics, longer supply chains. |
| Central America | $3,000 – $8,000 | Mixed geology; costs vary widely by country and terrain. |
| Southeast Asia (Cambodia, Nepal) | $300 – $1,500 | Shallow hand-dug or family wells — much smaller scale, fewer people served. |
How a $1,950 Well Actually Gets Built
From the day your donation lands to the day the village celebrates, a SevaChild water well takes about three weeks to complete.
- 1Village selection & surveyOur Seva Partners in India identify a tribal or rural village with no safe water source and run a hydrogeological survey to confirm the aquifer.
- 2Drilling (200–350 ft)A rig drills through hundreds of feet of rock and soil to reach clean groundwater below contaminated surface layers.
- 3Pump & platform installationAn India Mark II cast-iron hand pump is set, and a raised concrete platform with drainage is poured around it.
- 4Plaque & dedicationThe engraved donor plaque is mounted, and the village holds a dedication ceremony — often the first time in generations they've had safe water.
- 5Photos & donor reportYou receive GPS coordinates, dedication photos, and a written impact report within 90 days.


What You Get for $1,950
- A finished, working community well serving an entire village for 20+ years
- A personalized engraved plaque you can dedicate to a loved one
- Photos of the completed well and village dedication ceremony
- GPS coordinates and a full donor impact report within 90 days
- A trained village water committee for long-term maintenance
- A 100% tax-deductible receipt — US 501(c)(3), EIN 27-2259641
FAQ — Water Well Costs
Continue Researching Water Well Charities
Water Wells Program
How SevaChild's $1,950 well program works — from site selection to dedication.
Learn moreClean Water in India
The scale of India's clean water crisis and how village wells solve it.
Learn moreGratitude Well
Honor a loved one with an engraved plaque on a permanent water well in India.
Learn more